Device Settings
The Device Settings window contains device-specific settings for your laser. The settings available change based on the device selected, so not all of the settings described below will necessarily be shown on your computer.
Access Device Settings by going to Edit → Device Settings or clicking 
in the Main Toolbar. If you have multiple lasers installed, make sure you have the correct device selected in the Laser window.
Device Settings Window
The Device Settings window
The Device Settings window is split into several tabs, not all of which will be available for all machines.
- Basic Settings contains the most commonly used settings.
- GCode allows for modification of the GCode output for GCode devices.
- Additional Settings controls the settings used for simulating a preview and estimating time.
- Custom GCode allows for advanced GCode customization when using the Custom GCode device type.
- Galvo and Basic Settings is the Galvo laser version of the Basic Settings tab.
- Ports and Laser Settings allows for configuration of a Galvo laser's ports and laser source.
Troubleshooting
- If you aren't seeing a setting you expected to see, check which tab you're in and make sure it's applicable to your laser.
Related Topics
For more help using LightBurn, please visit our forum to talk with LightBurn staff and users, or email support.